Skip to content
Weik.ioReleases
Try Weik.io

This page describes Weik.io 2026.2.3, and the current release is Weik.io 2026.2.4.

Releases2026.2.3

Weik.io 2026.2.3

An API key can now follow its owner's access, including the roles that an identity provider's claim mappings give. Every image moves to .NET 10.0.14, which fixes a high-severity advisory.

Highlights

API keys

An API key is now either Only these or All my access. An Only these key has the grants it was made with. An All my access key has what its owner has at each request, so a project or role given later reaches it. The key that weikio login makes is always an All my access key.

Roles from sign-in

A role that a claim mapping gives now counts through the CLI and the API, on a weikio login key or on an All my access key made in a sign-in through the identity provider. It counts while the provider's last confirmation of the person lasts, which is 30 days unless the provider's rolesCountFor sets another length. Each sign-in through the provider confirms the person again.

API key expiry

weikio apikey create without --expires now gives the key 90 days, or 30 days with --platform-admin. --expires never makes a key that never expires. A key made before the upgrade keeps its expiry.

Sign-in lock

Five wrong passwords from one address now lock that address out of the account for 15 minutes, while other addresses can still sign in. Five wrong codes still lock the account for every address.

Notice line

A platform administrator can set one line of up to 300 characters that shows at the top of every admin UI page and on the signed-out pages. Set it with weikio notice set <text> or in the Notice panel on Settings, Installation. Anyone who reaches the installation within its allowed networks can see the notice before signing in.

Builds

One step of a build has 15 minutes. A step that runs out of them fails the build with an error that mentions the step. A version create that finds no build slot within two minutes gets 503 too_many_builds with Retry-After 30.

Telemetry

One telemetry batch has at most 16,384 entries. A larger batch gets 413 body_too_large. Each hub server handles two batches at once. A batch that finds no place within two seconds gets 503 with Retry-After 5, and its sender sends it again.

Agents on Windows

The install.cmd of a new Windows agent bundle checks that the installer's signature is valid and that Adafy Oy signed it, before it stops the agent. Issue a new bundle with weikio agent credentials <agent> --out <dir> and run its install.cmd as an administrator.

Images

The Weik.io images are on Docker Hub with the exact version as their tag, and no image is tagged latest. images.env pins every image by its digest.

ImageWhat it isDigest
weikio/weikio-backend:2026.2.3The backend: HTTP API, admin UI, builder and token issuersha256:583f941e2370…
weikio/weikio-apim:2026.2.3The gatewaysha256:631e43936b16…
weikio/weikio-agent:2026.2.3The agent that runs your integrationssha256:0b845f61295c…
weikio/weikio-forwarder:2026.2.3The telemetry forwardersha256:882da437bf32…
weikio/weikio-logstore:2026.2.3The log storesha256:c8000f374dff…
weikio/weikio-metricstore:2026.2.3The metric storesha256:bfc04696a3eb…
weikio/weikio-tracestore:2026.2.3The trace storesha256:7418318f8931…
nats:2.14.7-alpine3.22The message serversha256:4063edae0717…
traefik:v3.7.13The TLS terminatorsha256:24841fe2de73…
victoriametrics/victoria-logs:v1.52.0The store program inside weikio/weikio-logstoresha256:47b820890d64…
otel/opentelemetry-collector-contrib:0.160.0The OpenTelemetry Collector on your Weik.io serverssha256:799dc6cf12c9…
victoriametrics/victoria-metrics:v1.153.0The store program inside weikio/weikio-metricstoresha256:5eff7af5341e…
victoriametrics/victoria-traces:v0.12.0The store program inside weikio/weikio-tracestoresha256:80919fcc85cc…

The table shows the start of each digest, and images.env has them in full.

Files

The checksums are from the release's SHA256SUMS files. The Windows CLI and the agent installer are signed by Adafy Oy. curl -fsSL https://weik.io/install.sh | sh checks the CLI before it places it.

FileWhat it isSHA-256
weikio-2026.2.3-linux-x64The CLI for Linux x64714f627a38ff07548ab0f7c069d94a8523174a325ac089ace77f29d8a85b59ee
weikio-2026.2.3-win-x64.exeThe CLI for Windows x64, signed by Adafy Oy2a8cca3ac7f2d0e2815c185df29293f91c51e130b8def1872d1968d812b17fa6
SHA256SUMSThe checksums of the two CLI files
weikio-agent-win-x64-2026.2.3.msiThe agent installer for Windows Server 2022 and 2025, signed by Adafy Oy38b15e3adb9161dfee8fb18f99e8808cb541ad2243fbc2153263a7fe61062d90
SHA256SUMSThe checksum of the agent installer
images.envEvery image of the release with its tag and digest, for the install and upgrade.shadaba5459966e1bb298ba422181ff63daba3a98e491ed664c757115caf7ce2de
images.lock.jsonThe same images as JSONd340742ae7f7bcde53a151726712bd3f3d67c3cec8f57398f05bfeef203dc802
SHA256SUMSThe checksums of images.env and images.lock.json

The open source projects inside the images, with their versions and licences, are listed in Third-party software.

Upgrade notes

Check these before you upgrade:

  • On a hub whose Linux is older than 6.7 or can't use Landlock, builds stop with this upgrade. A platform administrator allows them again with weikio settings set --allow-builds-without-network-limit=true or in the Edit installation settings dialog. Until then a version that would build is refused, and Problems shows Builds are stopped.
  • Every agent's link to the hub breaks once during the upgrade, because the upgrade signs the hub's account token again.
  • The upgrade starts each telemetry store again in a new container. Each store keeps its volume, so its stored data stays. On a hub of several servers, Problems can show for up to 30 seconds afterwards that a store isn't responding, and the next reading clears it.
  • The upgrade gives the start of a CLI login its own routes through the terminator. To load them, run docker compose restart terminator in the stack directory. On a hub of several servers, run it on each server, one at a time. The agents that connect through a server link again within seconds of its restart.
  • A schedule or transfer keeps its run record at once only in a version built on 2026.2.3. A version built earlier behaves as it did until you build and deploy a new version of it.
  • Every API key made before the upgrade keeps the access it had. Run weikio login once more to get a key that follows your roles.
Terminal
$ sudo sh ./upgrade.sh https://weik.io/downloads/releases/2026.2.3/images.env

Upgrades and rollback in the docs has the steps of an upgrade and of a rollback.

Fixes

  • Every image, the CLI and the Windows agent move from .NET 10.0.12 to 10.0.14. This fixes the Brotli decoder advisory GHSA-p3jp-9v83-76w9 (CVE-2026-111497, high severity). The only Brotli decoder in Weik.io is the gateway's upstream handler, which an API version turns on with connection.automaticDecompression.
  • The move to 10.0.14 also fixes CVE-2026-88092 in how the web server handles a connection cut off before its request is complete. It applies to every installation, whatever its settings.
  • The gateway no longer passes a proxy credential on to a redirect's destination (CVE-2026-66822). The fault needed allowAutoRedirect and useProxy on an API version, and both are off by default.
  • weikio member add with an empty --env, --integrations or --apis is refused, where it used to lift the limit. When its read of the member fails, the command now stops and sends nothing, where a 503 used to widen a limited grant to the whole project.
  • A webhook's receipt no longer keeps an x-api-key value from the query string.
  • In a version built on 2026.2.3, a schedule's run record or a transfer's run summary that the hub doesn't store is kept on the agent's host and sent once the hub can be reached.
  • A backup no longer stops at a stream whose project or environment was deleted during the backup. 2026.2.0 to 2026.2.2 have the same fault.
  • A restore on a hub of several servers no longer stops part way when the other servers' disks are busy.
  • On Observability, Logs, the Load older lines button no longer replaces the page with Couldn't show this page.
  • A Windows agent's install makes the administrators the owner of the agent's home, and it refuses a home that is a link or that another account owns. The agent accepts from its agent.env only the lines the hub writes there and four settings an operator may set.

Known issues

  • Five wrong passwords lock out one address at a time, so a caller who rotates many addresses avoids the lock. An account-wide limit is planned for 2026.2.5.
  • Under PowerShell's Constrained Language Mode, install.cmd refuses a signed installer and says it isn't signed by Adafy Oy.
  • During an upgrade straight from 2026.2.0 or 2026.2.1, doctor can warn about the delivery notices store. The backend updates the store within a minute, so you don't need to do anything.
  • In the admin UI, Delete variable leaves API deployments out of its count. It can then delete a variable that a production API uses, which breaks that API. The CLI lists those API versions.

Sign in to the live demo

Sign in with the shared viewer account, which can open every screen of the example projects and can't change anything.

E-mail
viewer@demo.weik.io
Password
try-weikio-live-demo
Open the live demo